Sways and distortion have been disadvantages for progressive lens users.
These are major factors that make the user feel “difficult to adapt” and “difficult to use.”
Our new designing engine,“DIGITECH-CORE 5” has been developed and installed in to the “EASYONE WS” to reduce sway and distortion to a minimum.
The “EASYONE WS” is a fusion of double surface progressive + double surface aspheric design that has achieved a high-grade level of comfort.
| Seamless sight with suppressed sway and distortion
“Double surface progressive + Double aspheric design and “DIGITECH-CORE 5” controls sways and distortion.
Comfortableness which was not possible before is realizes with the combination of the double surface progressive + aspheric design and the DIGITECH CORE 5. From considerations that the difference of magnification and minimization effect due to the power difference on far and near vision causes the uncomfortableness when worn, the double surface progressive + double surface aspheric design of EASYONE WS has been design to reduce this difference by aligning the difference of this magnification (minimization) effect close as possible. Further more the new calculations of the DIGITECH CORE 5 allow further reduction of distortions, thus provides a more natural vision with less sway and distortion then ever before.
| Soft and smooth sight with less blur
Aberration is substantially reduced leading to the improvement of sways and distortion. The maximum aberration is suppressed to a minimum to improve the ease of use at the intermediate to near-sight zones, providing a soft and smooth sight with less blur.
“EASYONE” responds to your enjoying mind with Active Mode.
Best compensation is added to eliminate
“deviation of the sightline” and “power error in the sensed visibility degree” that generate due to the angle of warp varying among frames,
improving the wearing feel.
Angle of warp: 0.0°-15.0°(in increments of 0.1°)